lsl27t thru LSL210T surface mount schottky rectifier reverse voltage 70~100v forward current 2.0a features ? schottky barrier diodes ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1 , per j-std-020 ? solder dip 260 c, 10 s ? low profile typical thickness 1.0mm typical applications for use of fast swiching in rf module, lighting, cellular phone, portable device, power supplies, and other consumer applications. vrrm 70 80 90 100 v vrms 49 56 63 70 v vdc 70 80 90 100 v if(av) a ifsm a tj, tstg c if=1a, ta=25 if=2a, ta=25 vf ta=25 ua ta=125 ma typical junction capacitance 4.0 v, 1 mhz c j pf typical thermal resistance juntion to lead r jl /w note1:thermal resistance from junction to lead,mounted on pcb with 8.08.0mm copper pads 0.60 0.70 5 5 instantaneous forward voltage volts 0.65 0.76 0.86 dc reverse current at rated dc blocking voltage ir 110 14 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol unit typ. max. 0.54 maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current 2.0 operating junction and storage temperature range - 55 to + 150 peak forward surge current 8.3 ms single half sine-wave superimposed on rated load 50 maximum ratings (ta = 25 c unless otherwise noted) parameter symbol lsl27t lsl28t lsl29t LSL210T unit esgb (smaf) www.goodark.com 1/4 2016.01-rev.a
lsl27t thru LSL210T surface mount schottky rectifier reverse voltage 70~100v forward current 2.0a ratings and characteristics curves (ta = 25 unless otherwise noted) figure 1.forward current derating curve figure 2.maximum non - repetitive peak forward surge current figure 3. typical instantaneous forward characteristics figure 4. typical reverse characteristics figure 5. typical junction capacitance 0.01 0.1 1 10 0 0.2 0.4 0.6 0.8 1 1.2 instantaneous forward current (a) instantaneous forward voltage (v) 25 85 125 150 0.01 1 100 10000 1000000 0 20 40 60 80 100 instantaneous reverse current (ua) instantaneous reverse voltage (v) 25 85 125 1 10 100 1000 0.1 1 10 junction capacitance (pf) reverse voltage (v) tj=25 f=1.0mhz vsig=50m vp - p 0 0.5 1 1.5 2 2.5 0 25 50 75 100 125 150 average forward rectified current, a lead temperature 0 10 20 30 40 50 1 10 100 peak forward surge current a number of cycles at 60hz www.goodark.com 2/4 2016.01-rev.a
lsl27t thru LSL210T surface mount schottky rectifier reverse voltage 70~100v forward current 2.0a package outline dimensions packing information packing quantities: tape & reel specification soldering footprint www.goodark.com 3/4 2016.01-rev.a dim min max min max a 0.92 1.08 0.036 0.043 a1 0 0.1 0.000 0.004 b 1.25 1.45 0.049 0.057 c 0.1 0.25 0.004 0.010 d 2.6 2.8 0.102 0.110 e 4.1 4.3 0.161 0.169 l 0.8 1.0 0.031 0.039 he 4.8 5.2 0.189 0.205 unit: mm unit: inch reel size quantity/reel quantity/inner box quantity/carton 7" 3k 21k 84k 13" 10k 20k 180k
lsl27t thru LSL210T surface mount schottky rectifier reverse voltage 70~100v forward current 2.0a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good-ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2016.01-rev.a
|
